Why Does My Standby Generator Start but Not Power My House?

If your standby generator starts during a utility outage but your house still has no power, the automatic transfer switch may not have connected the home to the generator. The generator’s output breaker may be open or tripped, or the generator may not be producing usable power. If only a few rooms or appliances are out, check which circuits your system was designed to back up.

The most useful clues are whether anything came back on, whether the generator stayed running and whether the controller displayed an alert. Those observations can help a service technician narrow down the problem without you opening any electrical equipment.

Two Energo technicians standing beside an installed rooftop Generac generator

What does the automatic transfer switch do?

The automatic transfer switch, often called an ATS, connects your backed-up circuits to either utility power or generator power. During an outage, a properly operating system starts the generator, waits for its output to stabilize and then switches the load.

Generac’s guidance on power transfer failures explains that on covered standby models, an open generator output breaker, also called the main line circuit breaker, can let the engine run while preventing the switch from transferring to generator power. A switch or control fault can also interfere with transfer.

What happened when the generator started?

None of the backed-up circuits came on

If the refrigerator, heating system and lights that usually run on backup all stayed off while the engine kept running, the problem may be in the path that serves those circuits. The generator may not have delivered usable power to the transfer switch, or the switch may not have transferred. The sound of the engine alone can’t tell you which happened. A short pause before power comes back can be part of normal startup. If the engine keeps running and the circuits never come on, tell the service team how long you waited. The normal delay varies with the equipment and its settings.

Some rooms or appliances came back on

Start with what normally comes back on during an outage. Some standby systems serve a dedicated group of circuits, such as the refrigerator, heating equipment and selected lights. Larger loads may be managed separately, so an electric range or central air conditioner can stay off while other circuits are powered. Your installation paperwork or the circuit list from your installer can help you identify what the system is intended to run.

If the kitchen lights and refrigerator are working but the boiler you normally rely on stays off, report that the boiler alone is affected. Its circuit or the heating equipment itself may need attention. If you’re unsure how your home was set up, our guide to whole-home generator sizing and circuit coverage explains how backup loads are planned.

Power came back, then dropped again

Note whether the engine was still running when the lights went out and whether all backed-up circuits or just one circuit lost power. If an appliance such as central air had just started, mention it. That timing gives the electrician a specific change in electrical demand to investigate. If the engine also stopped, note any fault code and see our standby generator no-start guide, which also covers startup followed by a shutdown. For a failure after several hours of running, share the runtime and check your model’s guidance for extended standby generator operation.

Why can a standby generator pass its weekly test and still fail in an outage?

It depends on what the test does. Generac explains that some Guardian models run their exercise cycle without transferring the home’s electrical load. Other models can exercise with a transfer. On a system that runs the engine alone, hearing a successful weekly exercise tells you the engine started. It leaves the automatic transfer and the backed-up circuits untested. Your owner’s manual can tell you which type of exercise your model runs.

What can you check before calling for generator service?

Confirm whether there was a utility outage and whether the generator started automatically, during a scheduled exercise or after a manual start. Write down the make and model, the time the power went out and any alert or fault code you can read on the controller or monitoring app. Keep the transfer-switch cabinet closed. Leave internal wiring, voltage checks, manual transfers and breaker troubleshooting to a qualified professional.

What will an electrician check if the generator runs but the house has no power?

A licensed electrician can verify whether the generator produces usable voltage, whether that power reaches the automatic transfer switch and whether the switch connects it to the backed-up circuits. Once power transfers, the electrician can check whether it stays on as the circuits and appliances you depend on come online. If the issue appeared during an actual outage, ask whether the service visit can include a controlled test of automatic transfer. That lets the electrician observe the full sequence from utility power loss to the generator carrying the home’s backup circuits. If the problem happened only once, your notes about which circuits went dark and what was running at the time can help the electrician decide what to test first.

Frequently asked questions

Can a standby generator run when its output breaker is off?

Yes. On some systems, the engine can start with the generator’s output breaker open. The open breaker prevents generator power from reaching the transfer switch or backed-up circuits.

Should I move the transfer switch manually if the house stays dark?

Leave manual transfer to a qualified professional. The switch may contain live utility or generator voltage, and a professional can test the system using the procedure for your equipment.

Does a failed transfer mean the switch needs replacing?

A failed transfer can start elsewhere in the system, such as at the generator’s output breaker or in the controls that tell the switch when to move. An electrician can find where power or the transfer signal stops before recommending a repair.

Request Service for a Standby Generator That Isn’t Powering Your Home

Energo’s residential generator service team can check whether the generator is producing power and whether the transfer switch is delivering it to the right circuits. If you’re in NYC, Westchester or Nassau County, tell us what stayed on, what stayed off and whether the controller showed an alert.

Why Does My Standby Generator Start but Not Power My House?

If your standby generator runs but your home stays dark, learn what the transfer switch, generator breaker and backed-up circuits can tell you before you call for service.

What Does a Full-Service Heating Oil Company Actually Include?

Learn what full-service heating oil may include, how it differs from delivery-only providers and which services to compare before choosing a company.